No products in the cart.

No products in the cart.

vectornator how to group

How To Group Layers In Vectornator

Did you just search for “Vectornator how to group” in Google?

Vectornator has been used over the years to design anything that you can think of.

It uses mathematical formulas that allow images to be scaled or modified without losing image quality or resolution.

There is a variety of software available in the industry and has almost the same features that the Vectornator has.

However, there are slight features that can be used and differences present between the other types of software.

A key difference is that the Vectornator does not stick to a Mac-first interface on some devices.

One key feature of it is that it can group layers.

This article will help you if ever you have searched “Vectornator how to group”.

Let’s find out more about it!

vectornator how to group

What’s So Special About Vectornator?

One of the unique features of Vectornator is that it is the company with the youngest founder.

Vladimir Danilla, 19, started working on the software back when he was only ten years old.

His motivation to proceed with his dream was when won the German Youth Science Fair while he was still in high school. 

The young boy decided to expound on his idea.

After some time, he was able to show what he meant by the concept. 

His efforts were highly appreciated, and the idea was bought by a huge tech company.

With the Vectornator, the company managed to beat one of its strongest competitors, Adobe.

It was considered the highest-ranked in the town. 

Vectornator also supports various types of artboards whenever they are placed or accused in a kind of document.

How to Group Layers in Vectornator

Here’s how to group layers in Vectornator.

To group layers, one selects multiple layers.

Once you’ve selected all the layers you want to group, click on the “Group” button in the Arrange Tab.

You will know that you have successfully grouped layers if you see the letter “G” at the bottom right corner of the group.

In this way, you can also ungroup by tapping on the Ungroup button.

vectornator how to group

Pointers on Using Layer Groups Effectively

Simply knowing how to group layers in Vectornator is enough.

Below are some helpful pointers on how to use layer groups effectively.

Layer groups are an essential tool for designers who want to stay organized and work efficiently.

Here are some tips for using them effectively:

Use Clear and Consistent Naming Conventions

When creating a group, give it a name that accurately reflects the content within it.

This will make it easy to find and modify the group later on.

Organize Groups Within Groups

If your design contains multiple layers and you need to group them, consider creating subgroups within larger groups.

This will help you keep track of everything and quickly find what you need.

Use Groups for Version Control

As you work on your design, create groups to save different versions of your work.

This way, you can easily go back to a previous version if needed, without having to start from scratch.

Take Advantage of Grouping for Quick Edits

When you have several layers and you need to edit them in a similar way, then group them together.

This will allow you to apply changes to all layers at once, rather than having to edit them individually.

Consider Using Groups for Animations.

If you’re creating an animated design, grouping layers can make it easier to manage and animate specific elements.

You can animate the entire group or just specific layers within it.

Don’t Be Afraid to Experiment with Different Ways of Using Layer Groups

There’s no one “right” way to use them, and different projects may require different approaches.

By staying organized and using layer groups effectively, you can make your design process more efficient and enjoyable.

Vectornator Tips and Tricks

To comprehensively understand Vectornator, there is a need to understand the layout of the software.

Various features aid the user in their work while using the software.

  • toolbar on the left side has all the available vector tools
  • left corner section entails the back button, the fit to view button, the undo and redo button
  • middle section contains the options bar
  • right corner contains the inspector buttons

Vectornator contains a variety of tips and tricks it uses in its operations to make it effective and reliable.

These tips and tricks are handy.

They are the main components that you can use to come up with effective operations and modes.

Some of the essential tips and tricks used to create a Vectornator on iPhone or on other devices are:

  • Show or Hide Inspector- It entails the process of right sliding from on the screen and this assists in revealing the last opened tab on the screen of the tablet or the phone
  • Precision Sliders- designed with unique features, which entail moving the fingers away while attempting to slide.

Financings and After Vectornator X Trials

Auto Trace

As designers, there is a general familiarity that comes with the attempt to be victorious in an image.

The main procedures such as manual tracing become so tedious and cumbersome to some extent.

The creators and the founders of this kind of software found it so hard to deal with the previous version.

They decided to apply a more technical and advanced type of machine.

The machine learning-based auto-trace feature allowed for fastening the vectorizing process and making it more intuitive.

The reviewers of the process were so happy.

They felt liberated coming up with the result or something closer to what they needed.


The features and options made towards coming up with an effective Vectornator are so impressive and enticing.

The reviews show approval from the people who understand the graphics and design nature of vectorizing.

The second type of feature is the artboards.

It is so much more adaptive and enticing as compared to the first stage.

Vectornator X was able to adapt and install this second type of feature.

It is very much reliable as the operators can use more than one artboard.

They make work easier on the software.

Artboards allow you to create different frames of your design without going back and forth across documents.

The UI Improvements and Design

This is the type of layout or interface produced by the manufacturers and installed during the installation of the Vectornator.

It allows for making workflows much more comfortable and reliable.

What the operator of this software needs to do is to make a transparent and straightforward browse through the tools just by merely swiping on the device screen.

It is very much more comfortable to navigate, it is prudently fast in operation and response to touch and without any benefits of doubt, and it works very well.

The UI improvements and designs ensure that the layer tabs work perfectly as compared to others.

It has varied types of new and much more gestures which are meant to assist the operator to export a single type of layer from one point to the other.

There is also the installation and the Magical Canvas which just from its name sounds so lovely and enticing.

Its main interface is formed in a way that it is made to automatically move aside whenever the user of the iPad tends to be drawing or moving objects from one location to the other. 

The process of dragging and moving objects from one place to the other is mainly meant to make work easier by revealing the canvas and creating much more space.

The Vectornator Guides

How To Access The Guides Layer

Move to the bottom of the specified layer tab that is in the inspector tab.

In keen observation, one will be able to come across the fixed Guides Layer folder.

Through a simple tap on the bottom layer tab of this device, there will be the ability to enable the various available guides.

Additionally, there will be an automatic activation of the specific types of action bars that are found on the left side of the screen.

How To Create A New Guide

Creating a new guide is always very simple.

It only entails picking or selecting one tool from the various tools within the action bar and making a tap on it to start drawing the desired guide.

There is also a specific type of layout that where guides will be viewed.

It is not just in line, but the appearance will be in the form of squares, circles, and other features.

How To Edit Vectornator Guides

There is a specific model that is always applied when one is attempting to come up with more advanced ways of editing the various guides of the Vectoring process.

The most appropriate procedure is to enable the Guides Layer, and from that, one can choose the type of manual that one needs to make edits on.

Duplicate Guides

With the application of the concept of duplicating the guides, the duplicator will be able to get adequate space for the various elements within the software.

All that will be on the interest and type of design one would need.

Therefore, to effectively come up with duplicate editing, one needs to select the guides that best fit him or her.

Tap on the duplicate tool which is found right inside the action bar and then make drag and drop the guides to the area of interest.


To open the Layers Tab, tap on the fourth icon from the left in the Inspector Bar.

To create a new layer, tap the first icon from the right inside the header section of the Layer Tab to create a new layer.

Insert the new layer right above the current layer.

Assign layers with sequential numbers and rename them to their multiple layers.

Images And Icons

When you import any image, Vectornator also recognizes image layers thanks to Apple’s machine learning framework CoreML.

It auto-renames the layer to what it thinks its content depicts.

Users can tap the lock/unlock icon so that their objects can stay in place.

The hide/show icon helps visualize the layer’s elements and keep editing it.

Multiple Selections

For multiple selections of layers, one can tap a layer and consequently swipe right or left to actualize this.

To select a sublayer, tap on the main layer to open it and then tap on every single element to select it.

There are three options available when one swipes left across a layer; export, duplicate, and export.

With Vectornator X, you can finally export one layer with a tap without leaving your canvas or copy-paste your objects into a new document.

The duplicate option is essential in that one can make new changes without affecting the original layer by tapping the icon to duplicate the layer immediately above the original one.

There is also an option to delete any layer with a tap easily, but one must be careful because this is final and irreversible.

Final Thoughts

Hopefully, we were able to satisfy your query about Vectornator and how to group layers fully.

Vectornator empowers designers and gives them the ability to create everything from sophisticated illustrations to excellent UI, and web design, as well as amazing layouts.

Every other app seems to have stuck a Mac-first interface.

In contrast, Vladimir and the team have designed theirs with easiness of use in mind so using it with an Apple Pencil feels like you’re organically drawing vector shapes, rather than just manipulating anchor points.

Also with the interface, more searching “Vectornator how to group” on Google!

If you found this article on Vectornator How to Group Layers interesting, check out the others below.

10 Best Procreate Calligraphy Brushes (Free and Paid Options)

How to Monetize Digital Art

10 Best Brand Guidelines Template Designs For Illustrator

Leave a Reply

Your email address will not be published. Required fields are marked *

Back To Top